How Ceiling Fan Light Manufacturer To Choose Parts?

The light type ceiling fan is a mechanical fan installed on the ceiling of the living room or bedroom and electrically powered generally. The difference with the traditional fan, it not only can blowing the wind to cool people but can illuminate the room as well, which is pleased with people. So it is quite popular on the market.

Generally, the fan consists of the fan blade part and lamp parts. The ceiling fan parts components include the blade, case, pull chain switch, wattage limit device, lamp holder, wire harness, terminal block, connectors, and so on(please contact us if you want them). If a fan manufacturer wanna collect all the accessories will be very hard if they can’t buy from one or two factory company. There is no doubt it will waste buyers much time and money to buy them all.

  • What does the pull chain switch do on a ceiling fan?

For most fans, the pull switch is not only used to control the fan rotation speed, power ON/OFF but also to adjust the brightness and power of the light. Such as the 3-speed, ON/FF, L1 to 4, LO-HI-OFF, etc.

Besides, choosing a pull switch also need to know the current and voltage requirement. For instance, in American home use, we can use the 125VAC but if in the United Kingdom we may choose the 250VAC type.

Pull-chain-switch

  • The wattage limit device for protection

The wattage limit device also calls power limiter which is used to resist the current of an electrical circuit for lamps and ceiling fans. When the load is less than or equal to a numerical, the light bulb works normally while overload happen, the limiter will switch off the circuit for a moment.

Power-limiter

  • Holder and Lamp

As the lamp parts, the holder and lamp is also import for the fan. Above all, the holder must fit with the light size. Usually, the T8, T5, E27, T12, GU-24, E12, etc are the common type.

Lamp-Holder

  • The role to connect all the parts.The wire harness & connectors.

For this purpose, the wire harness set can connect all the components and make them work. The manufacturer only chooses the type that they need.
Besides, the close-end and screw-on connector, terminal block, and pull chain type are also available and they can use in the ceiling fan production process.

Lamp-Holder

In a word, if you wanna collect them all, don’t buy from too many companies. Moreover, the quality is very important especially the certification. The goods news is that all these parts are available in Zing Ear, which was founded in 1983. So we have a lot of experience in production and service. Besides, our products are approved by UL, c-UL, CSA, ENEC, CQC, TUV to make sure product quality.

评论

发表评论

此博客中的热门博文

How to replace micro switch on shift lever?

图片
  A shift lever microswitch is used for signalization in a car shift system. Today, I will use  Cadillac SLS  as an example to show you how to replace the micro switch on the shift lever Firstly, in order to operate easily, we need to take the whole shift system off the car to the ground. Like the picture show. Because of the invisible screws, we need to unload carefully or may damage your parts inside. Secondly, find where the micro switch is. Open the shift lever inner structure, you can see a 2 solder terminal micro switch wiring with cable. Let look carefully, we can know the rating of this item is 0.1A, 5E4, and T120. This is why I say the micro switch is only for signalization in the car system. Then, take it off with a soldering iron. Thirdly, solder a new switch to replace the old one. Fourthly, do the re-installment. Meanwhile,  if you want to use another brand switch to replace it. You need to make sure most of the  parameters are the same as the primary switch and do some t
阅读全文

The micro switches for a mouse?

图片
  The mouse button switches The computer mouse microswitches also call the mouse buttons are electrical switch on a mouse. They can be pressed to select or communicate with a component of an icon. They are a conventional small snap-action switch with PCB terminals soldered on the circuit board. The most frequently offered style on the market is the three-button scroll mouse, which including the left and right buttons, mouse wheel. Individuals most typically use the second button to invoke a contextual menu in the computer system’s software program user interface. By default, the key computer mouse switch sits located on the left-hand side of the mouse, for the benefit of right-handed customers. Left-handed individuals can generally reverse this setup via software program. Design a Mouse Switch Clicking Sound of Mouse Microswitch The mouse will make a “Clicking” sound to let you know the action of pressing a button. The reason why the sound happens is because of the particular switch te
阅读全文